NANUK 995 for DJI Ground Station RTK-Drone Case-Black-NANUK
NANUK 995 for DJI Ground Station RTK-Drone Case-Black-NANUK
NANUK 995 for DJI Ground Station RTK-Drone Case-Black-NANUK
NANUK 995 for DJI Ground Station RTK-Drone Case-Black-NANUK
NANUK 995 for DJI Ground Station RTK-Drone Case-Black-NANUK
NANUK 995 for DJI Ground Station RTK-Drone Case-Olive-NANUK
NANUK 995 for DJI Ground Station RTK-Drone Case-Black-NANUK

SKU 995S-081BK-0A0-19049

NANUK 995 for DJI™ Ground Station RTK

CAD $1,059.95
Color


Made in Canada
Lifetime Warranty
Military Approved

About the NANUK 995 for DJI™ Ground Station RTK

Measuring 52” inside, the NANUK 995 is our longest case built for extreme protection and transportation of double rifles, primarily. It has earned the trust of sportsmen, sportswomen, hunters, law enforcement and the military. After al... Read more


Interior Size (LxWxH)
52 in x 14.5 in x 6 in
1321 mm 368 mm x 152 mm
Exterior Size (LxWxH)
55.1 in x 17.3 in x 6.6 in
1399 mm x 440 mm x 168 mm

NANUK 995 for DJI™ Ground Station RTK

CAD $1,059.95

About the NANUK 995 for DJI™ Ground Station RTK

Measuring 52” inside, the NANUK 995 is our longest case built for extreme protection and transportation of double rifles, primarily.

Measuring 52” inside, the NANUK 995 is our longest case built for extreme protection and transportation of double rifles, primarily.

It has earned the trust of sportsmen, sportswomen, hunters, law enforcement and the military. After all, the NANUK 995 is built to survive the outdoors, water, dust, impact and all kinds of abuse. It’s made to get in harm’s way so the gear inside stays safe and unharmed. It’s no wonder that it has also become the go-to case for photo and video pros who also use the NANUK 995 for lighting kits and tripods.

Built to organize, protect, carry and survive tough conditions, the 995 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s four (4) PowerClaw latches.

Built to organize, protect, carry and survive tough conditions, the 995 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s four (4) PowerClaw latches.

With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it. For extra security, two latches feature an integrated TSA accepted key lock to keep your equipment securely locked during transit but accessible for inspection by the TSA when required. This indestructible MIL-Spec case is equipped with a lid stay feature to keep the case safely open when in use and the reinforced stainless-steel eyelets can be used to secure additional padlocks.

The NANUK 995 protective case comes with two (2) soft grip and ergonomic handles to make it easy and comfortable to transport.

The NANUK 995 protective case comes with two (2) soft grip and ergonomic handles to make it easy and comfortable to transport.

The handles feature stainless steel hardware that are spring-loaded to avoid harm when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve.

NANUK 995 Proportions

This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with solid foam, custom foam or the case can be purchased empty.

Specifications

Exterior Size (LxWxH)
55.1 in x 17.3 in x 6.6 in
1399 mm x 440 mm x 168 mm
Interior Size (LxWxH)
52 in x 14.5 in x 6 in
1321 mm x 368 mm x 152 mm
Volume
74.1 L
Weight (Empty)
21.6 lb | 9.8 kg
Lid Depth
1.6 in | 112 cm
Base Depth
4.4 in | 112 mm
Temperature Range
Min -20°F (-29°C ) | Max 140°F (60°C)
Max Buoyancy
175 lb | 79.4 kg
Padlock Holes
0.34 in | 7.62 mm
Material
Lightweight NK-7 resin
Warranty
Lifetime warranty & 30-day satisfaction warranty
Airline Carry On
No
IP67 Waterproof & Dustproof

IP67 Waterproof & Dustproof

Go where no case has gone before.

NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!

Automatic Pressure Release Valve

Automatic Pressure Release Valve

Keep your case from sealing shut. Automatically.

Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.

PowerClaw Superior Latching System

PowerClaw Superior Latching System

Close with confidence. Open with ease.

Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.

Get High-Impact Protection with a fraction of the weight.

Indestructible & Lightweight NK-7 Resin

Get High-Impact Protection with a fraction of the weight.

Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.

Lid Stay & Reinforced Metal Padlock Holes

Reinforced Metal Padlock eyelets

Reinforced stainless-steel eyelets with a diameter of 8.5mm/0.34” can be used to secure additional padlocks.

NANUK comes loaded with innovative features. All models have integrate reinforced metal padlock eyelets that let you lock down your gear so you can carry and protect your valuables with confidence.

Polyurethane Wheels on NANUK Case

Polyurethane Wheels

Smooth & Silent rolling on any surface

Smooth mobility is a major advantage, especially when transporting cumbersome equipment. This NANUK case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.

TSA PowerClaw Latches

TSA PowerClaw Latches

One step up with Lockable PowerClaw Latches

We found a way to make our patented PowerClaw latches even better - they are now lockable! This NANUK case has two TSA PowerClaws and adds another layer of security to your case. All our TSA Latches bear the Travel Sentry® Red Diamond logo, which allows security personnel to open your case for inspection when required during travel. Each lock has a special TSA001 to TSA003 code, which is used by the TSA, CATSA, and other security agencies to know which secure tool to use to open the lock.

Spring Loaded Soft Grip Handle

Comfortable handles that stay out of your way during storage

NANUK's soft-grip handles make heavy transportation comfortable and convenient. On the LONG series cases, you'll find the added benefit of two extra-long spring-loaded handles that retract when released, minimizing the chances of damage during transit.

Specifications

Specifications

Exterior Size (LxWxH)
55.1 in x 17.3 in x 6.6 in
1399 mm x 440 mm x 168 mm
Interior Size (LxWxH)
52 in x 14.5 in x 6 in
1321 mm x 368 mm x 152 mm
Volume
74.1 L
Weight (Empty)
21.6 lb | 9.8 kg
Lid Depth
1.6 in | 112 cm
Base Depth
4.4 in | 112 mm
Temperature Range
Min -20°F (-29°C ) | Max 140°F (60°C)
Max Buoyancy
175 lb | 79.4 kg
Padlock Holes
0.34 in | 7.62 mm
Material
Lightweight NK-7 resin
Warranty
Lifetime warranty & 30-day satisfaction warranty
Airline Carry On
No
Certifications
IPX7 Ingress Protection - Waterproof

IPX7 Ingress Protection - Waterproof

IPX7 Ingress Protection signifies a product's waterproof capability, allowing it to be submerged in water up to 1 meter deep for 30 minutes, like a rugged smartphone case that shields your phone from water damage even when submerged briefly.
IP6X Ingress Protection - Dustproof

IP6X Ingress Protection - Dustproof

IP6X Ingress Protection certifies a product's complete resistance to fine dust particles, making it ideal for safeguarding sensitive electronics, ensuring they remain unaffected by dust in challenging environments such as deserts or construction sites.
ATA Specification 300 - Category 1 Impact

ATA Specification 300 - Category 1 Impact

ATA Specification 300 - Category 1 Impact ensures that hard cases, like those meeting these standards, can protect delicate equipment from damage during transportation, even when accidentally dropped from a height, making them a trusted choice for safeguarding valuable gear in rugged travel conditions.
ASTM D-4169 DC-18 Vibration

ASTM D-4169 DC-18 Vibration

ASTM D-4169 DC-18 Vibration Test is a standardized method to ensure that packaging, including hard cases, can endure vibrations during transit, guaranteeing the safety of enclosed items.
ASTM D-4169 DC-18 Rainfall

ASTM D-4169 DC-18 Rainfall

ASTM D-4169 DC-18 Rainfall Test is a standardized method to ensure packaging, like hard cases, can shield its contents from rain and moisture during transit, guaranteeing the protection of enclosed items in wet conditions.
MIL-STD-810F Immersion

MIL-STD-810F Immersion

The MIL-STD-810F Immersion Test is a military-standard evaluation to confirm that equipment, like hard cases, can endure submersion in water without suffering damage, ensuring their reliability in wet conditions.
ASTM D-4169 DC-18 Drop Test

ASTM D-4169 DC-18 Drop Test

ASTM D-4169 DC-18 Drop Test is a standard method for confirming the resilience of packaging, including hard cases, against real-world drops, ensuring the protection of contents during transit.
Downloads

Customer Reviews

Based on 5 reviews
80%
(4)
20%
(1)
0%
(0)
0%
(0)
0%
(0)
B
Brian Wilson (Alvarado, US)

NANUK 995 for DJI™ Ground Station RTK

B
Brian

Solid product.

A
Anthony Drummond (Albany, US)

NANUK 995 for DJI™ Ground Station RTK

J
Jon Keck (Effingham, US)
NANUK 995 for DJI™ Ground Station RTK

I was lookin for a case that could carry all the components of the DJI RTK Base Sation. Most other products only carries a portion of the componnents. I will need to order some custom foam to meet my exact needs. Overall, it is a very well built case. The latches are a bit cumbersome/more robust than what is need for my application. In my opinion, this case is the best option on the market currently.

F
FRANCESCO URPI (Oristano, IT)

Un prodotto eccellente. Realizzato con la massima cura, disegnato per essere pratico, funzionale ma soprattutto bello. Il case è solido, affidabile e da un immagine di professionalità. Elegante e gradevole anche il colore verde oliva.
Ho visto anche altri prodotti simili molto belli ma questo marchio - per me - li supera tutti ma soprattutto è bello esteticamente, ben disegnato, con le linee armoniche e contemporaneamente giusto e razionale per la gestione degli spazi interni e della cura nei piccoli dettagli.