Built to organize, protect, carry and survive tough conditions, the NANUK 963 waterproof hard case is impenetrable and indestructible with a lightweight, tough NK-7 resin shell and it’s five (5) PowerClaw latches.
With NANUK’s exclusive locking and latching system, your case stays shut and secured until you are ready to open it.
At 29 inches long and nearly 11 inches deep, the NANUK 963 can store a whole lot of your essentials. The NANUK 963 hard case offers the maximum level of protection for all of your personal and professional equipment. It adds the convenience of wheels to make traveling much easier with your photo gear, video gear, audio gear, medical or industrial equipment, outdoor gear and much more!
Three soft-grip handles make this wheeled case one of the most convenient and comfortable on the market. The 963's polyurethane wheels handle rough terrain with ease while the one-handed retractable handle offers unparalleled usability.
For total equipment protection and loads of capacity, look no further than the NANUK 963 case retractable handle and wheels to get your gear safely from point A to point B.
The NANUK 963 protective case comes with three (3) soft grip and ergonomic handles with stainless steel hardware and spring-loaded handles to keep them out of harm’s way when traveling or during shipping. This transport case is also equipped with an automatic pressure release valve.
This MIL-Spec injection molded case is backed by a lifetime warranty. Inside, products can be secured with cubed foam, custom foam, padded dividers or the case can be purchased empty.
- Interior (LxWxH) 29 x 18 x 10.6″
737 x 457 x 269 mm
- Exterior (LxWxH) 32.5 x 21 x 12.3″
826 x 533 x 312 mm
- Lid Depth 2.1″ | 53 mm
- Base Depth 8.5″ | 216 mm
- Internal Volume 5533 cu.in | 3.2 cu.ft | 90.6 L
- Weight (empty) 22.50 lb | 10.2 kg
- Temperature Range Min -20°F (-29°C ) | Max 140°F (60°C)
- Material Lightweight NK-7 resin
- Max buoyancy 205 lb | 93 kg
- Padlock Holes Diameter 0.340"
- Handle height from ground 36" | 41"
- Airline carry-on No*
*Check with your airline carrier before travelling.
- Interior (LxWxH)
- Interior (LxWxH)
- Exterior (LxWxH)
- Exterior (LxWxH)
- Lid Depth
- Base Depth
- 29 x 18 x 10.6″
- 737 x 457 x 269 mm
- 32.5 x 21 x 12.3″
- 826 x 533 x 312 mm
- 2.1″ | 53 mm
- 8.5″ | 216 mm
- 5533 cu.in | 3.2 cu.ft | 90.6 L
- 22.50 lb | 10.2 kg
- 22 × 17 × 12.9”
- 559 x 432 x 328 mm
- 25.4 × 20 × 14.5”
- 645 x 508 x 368 mm
- 2.1″ | 53 mm
- 10.8″ | 274 mm
- 4825 cu.in | 2.79 cu.ft | 79.0 L
- 19.2 lb | 8.7 kg
Smooth & Silent rolling on any surface
Smooth mobility is a major advantage, especially when transporting cumbersome equipment. The NANUK 963 case features polycarbonate wheels molded with polyurethane. Similar to what you’d find on rollerblades, these wheels, along with their sealed stainless steel bearings, ensure a quiet, effortless trip over a multitude of terrains and through lots of weather conditions.
2-Stage Retractable Handle
A Retractable Handle Fitted for Smalls & Talls
Hassle-free transport comes courtesy of NANUK's two-stage retractable handle. Posture-friendly, the handle can be adjusted to two different heights and offers easy, one-handed open and close with its quick-release button. Available on the NANUK 963 case.
PowerClaw Superior Latching System
Close with confidence. Open with ease.
Ensuring that your smaller gear stays well protected from the elements, the NANUK 963 case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.
IP67 Waterproof & Dustproof
Go where no case has gone before.
NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!
Indestructible & Lightweight NK-7 Resin
Get High-Impact Protection with a fraction of the weight.
Impact-resistant, lightweight, and armed with NK-7 resin body, the NANUK 963 protective case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.
Automatic Pressure Release Valve
Keep your case from sealing shut. Automatically.
Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.
Guaranteed for life
NANUK cases are designed and manufactured in Canada and are tested in some of the harshest conditions, including our own backyards. Every NANUK case comes with a lifetime guaranty so that if there is ever a problem with your case it will either be repaired and returned or replaced.
I needed the case to make a portable high brightness display for use with a drone used in both fire fighting and search and rescue. No problems getting it. I like the solid latches and the wheeled case so it's easy to move it around. I recommend this or any Nanuk case to people who like to make things and get them done !
Very Pleased with my NANUK case.
I like Nanuk cases, I have a bunch but you guys really need to let me mix and match and buy individual padded dividers. As it stands there is literally no where I can buy them, from you or any other company. Seriously, they are not available anywhere on the internet. These cases are meant to be customizable but if the dividers that come with it don't work, or you need more (perhaps you have lots of small items), you have no options. I need to be able to buy extra pads to make my case work. I don't understand why no case company offers this. You already make the pads, just offer them for sale individually for each case. I cannot be the only one who would buy them.
Also, there is no organizer available, that would be nice to have, I had to cannibalize one from my 955 case.
This product was bigger than expected. But very well-made. I was able to fit cases of ammo as well as tactical gear inside the case.
I got the 963 to store my lights -- 2 profoto B10, 1 B1x and an A1 along with 3 Nikon speedlights. The case will be perfect for taking the lights with me on location AND for general storage. As cliche as it sounds I've more than once been handling when thinking about purchasing the competitor's cases and 'got' my fingers opening or closing those cases. The Nanuk is a dream to open and close and the wheels and handles are so very well made -- goes along well with the total build quality which is excellent. Once the padded dividers are available for the 963 I'm getting at least one more 963 for cams and lenses. Not a big fan of the cubed foam but that's more a case of my sloppiness with trying to cut it to shape (certainly for layer depth if need less than the depth of each pad) without an electric knife), but the lights are in snug as bugs, safe. Definitely recommend NANUK!