NANUK 915 for DJI Mini 3 Pro Fly More
NANUK 915 for DJI Mini 3 Pro Fly More
NANUK 915 for DJI Mini 3 Pro Fly More
NANUK 915 for DJI Mini 3 Pro Fly More
NANUK 915 for DJI Mini 3 Pro Fly More
NANUK 915 for DJI Mini 3 Pro Fly More
NANUK 915 for DJI Mini 3 Pro Fly More
NANUK 915 for DJI™ Mini 3 Pro Fly More
NANUK 915 for DJI™ Mini 3 Pro Fly More
NANUK 915 for DJI™ Mini 3 Pro Fly More
NANUK 915 for DJI™ Mini 3 Pro Fly More
NANUK 915 for DJI™ Mini 3 Pro Fly More

NANUK 915 for DJI™ Mini 3 Pro Fly More

915S-080BK-0A0-C0956

Made in Canada
Lifetime Warranty
Military Approved
Regular priceCAD $172.95
/
Shipping calculated at checkout.

The NANUK 915 Waterproof Protective Case for DJI™ Mini 3 Pro Fly More was built to organize, protect and carry. The closed-cell high-quality foam is pre-cut to fit your DJI™ Mini 3 Pro. The clever design holds the Mini 3 Pro drone with... Read More

  • Exterior (L x W x H): 391 mm x 307 mm x 173 mm
  • Interior (L x W x H): 351 mm x 236 mm x 157 mm
  • Airline check-in: Yes
  • Airline cabin carry-on: Yes

About the NANUK 915 for DJI™ Mini 3 Pro Fly More

The NANUK 915 Waterproof Protective Case for DJI™ Mini 3 Pro Fly More was built to organize, protect and carry.

The NANUK 915 Waterproof Protective Case for DJI™ Mini 3 Pro Fly More was built to organize, protect and carry.

The closed-cell high-quality foam is pre-cut to fit your DJI™ Mini 3 Pro.

The closed-cell high-quality foam is pre-cut to fit your DJI™ Mini 3 Pro.

The clever design holds the Mini 3 Pro drone with props attached, the RC-N1 or the new DJI RC, six (6) additional Intelligent Flight Batteries, the Two-Way Charging Hub, data cable, spare propellers, and screws, securely.

The clever design holds the Mini 3 Pro drone with props attached, the RC-N1 or the new DJI RC, six (6) additional Intelligent Flight Batteries, the Two-Way Charging Hub, data cable, spare propellers, and screws, securely.

Equipped with a waterproof and indestructible NK-7 resin shell and PowerClaw superior latches, photographers, videographers, drone pilots, and enthusiasts trust NANUK to protect their DJI™ Mini 3 Pro.

Equipped with a waterproof and indestructible NK-7 resin shell and PowerClaw superior latches, photographers, videographers, drone pilots, and enthusiasts trust NANUK to protect their DJI™ Mini 3 Pro.

Protect your investment.

* Works for DJI mini 3 and mini 3 Pro

Features

IP67 Waterproof & Dustproof

IP67 Waterproof & DustproofGo where no case has gone before.

NANUK protective cases were primarily designed for front line protection, search and rescue missions, first responders, military, industrial, marine and diving uses. The professionals that rely on NANUK cases require a reliable, waterproof solution which resists deformation and fatigue. NANUK ensures a long-lasting, watertight seal - nothing gets in – nothing!

Automatic Pressure Release Valve

Automatic Pressure Release ValveKeep your case from sealing shut. Automatically.

Changes in altitude, temperature, humidity and geographic location create a “vacuum lock” which can effectively seal a case shut. NANUK's integrated auto-pressure valve equalizes this atmospheric pressure difference. Using state-of-the-art technology, the micro vent allows air to pass through while preventing water from entering.

PowerClaw Superior Latching System

PowerClaw Superior Latching SystemClose with confidence. Open with ease.

Ensuring that your smaller gear stays well protected from the elements, this NANUK case's patented PowerClaw latching system uses compressive force and triple action to clamp your case tight. Integrated slide locks offer added security, preventing your case from opening during transport or if it’s dropped. The super tough nylon construction and stainless-steel hardware ensure that your important items stay safe in your NANUK waterproof case no matter where your journey takes you.

Get High-Impact Protection with a fraction of the weight.

Indestructible & Lightweight NK-7 ResinGet High-Impact Protection with a fraction of the weight.

Impact-resistant, lightweight, and armed with an NK-7 resin body, this NANUK case is designed with rounded corners, thick, strong walls, and oversized details. No matter what nature throws its way, NANUK is built to survive. This NANUK is shock-absorbent to prevent damage to the case and, more importantly, to the valuable contents.

Stand out with a unique design and color selection.

Design & ColorsStand out with a unique design and color selection.

Rounded corners and chamfered edges merge with strong character lines to deliver a design that is as sleek and modern as it is tough and reliable. Be it for aesthetic preference or more practical purposes, color choice is an important feature for many NANUK users - choose from up to nine colors depending on the case.

Lid Stay & Reinforced Metal Padlock Holes

Lid Stay & Reinforced Metal Padlock HolesKeep the case from closing on your hands plus some added security

NANUK comes loaded with innovative features. All models have integrated lid stays molded into the hinge that keeps the case lid open when you need it to stay open which means no more pinched fingers. Available on this NANUK case is reinforced metal padlock holes that let you lock down your gear so you can carry and protect your valuables with confidence.

Customer Reviews

Based on 21 reviews
95%
(20)
5%
(1)
0%
(0)
0%
(0)
0%
(0)
F
Frederick MacKinnon
Great case!

Fantastic case, a bit on the expensive side but if you need bullet proof protection for your gear it's a winner!

J
Jared Groenewegen
Perfect fit

The case is perfect. Fits the drone, RC controller, and the batteries and charger. And I don’t feel the need to take the sticks off the controller. I always feel that everything is safe.

Y
Yves Bachand

NANUK 915 for DJI™ Mini 3 Pro Fly More

M
Mayson Elison
Great case

Great case works well keeps my stuff dust free when I’m not using it

c
colby
Dji mini 3 pro fly more case

It's a really nicely built case and the drone fits in it really nice and I'm happy knowing my drone is protected

You may also like